When you are building a new PC and turning it on for the first time, or when the USB port on your motherboard is damaged, you will typically get the error “ Fix USB device over current status detected.” The causes of this error are fairly varied and it happens frequently.
This error often indicates that a USB device has been disabled by the computer due to an overloading circuit. This serves as a safeguard against additional harm to your hardware.
It’s conceivable that the new motherboard you’re attempting to utilise has damage or a manufacturing defect. Either this is the case, or the USB-connected gadget you are using is broken, etc. We’ll go over each of these scenarios one at a time so you can see whether one applies to your situation.
Connecting USB devices and performing troubleshooting as
Make sure the USB drives you will be connecting to the computer are in good functioning order so that there won’t be any issues when you open your computer and start checking the USB components one at a time. The use of cheap keyboards and mice may cause a circuit breaker, which may also cause the error message to display for the first time. A fault current is probably present if you use a low keyboard or mouse.
Solution 1: Update Your USB Driver
The outdated drivers may cause some unexpected mistakes and have a negative impact on how you feel when using the computer. To correct USB device over current state detected, update your USB drivers. Follow the steps below.
Step 1. When Windows starts in Safe Mode, use Win + R to bring up the Run window. Enter devmgmt.msc into the box after that to access Device Manager.
Step 2. Universal Serial Bus controllers can be expanded by double-clicking it.
Step 3. Update driver can be chosen by right-clicking the USB driver that causes the “USB device over current status detected” issue.
Solution 1: Searching for lost Jumpers
A jumper is a tiny part that joins the motherboard’s USB port to your USB port. There is a jumper connecting each USB port. Therefore, it is necessary to verify each one to ensure that there are no damages. If there are any damages, you must replace them as soon as possible.
How can I see whether my USB ports are broken
On your Windows 11/10 PC, you can utilise the Device Manager approach to check for hardware changes to see if your USB ports are broken. Observe these guidelines: Run will appear once you click Start and enter it in the search box. Specify devmgmt. Click your computer to make it the highlighted item in Device Manager. Then click Scan for hardware changes after selecting Action. To make sure the USB device is funct
