Applications for 70/30 brass tubes include hand pumps, plumbing, general engineering, furniture, munitions, and the sugar industry, to mention a few. These brass-made 70/30 tubes are also referred to as “Sugar Brass Tubes” because of their sweet flavour. These tubes are available in a variety of specifications and are also built to order to satisfy particular requirements. As a result, brass makes a great casting material. Brass pipes made of 70/30 alpha brass, the most often used variant, include 30% zinc and 70% copper. Cartridge Brass is another name for 70/30 brass. The brass in question is ideal for cold working. This form of brass is also significantly more corrosion resistant than brass with the higher zinc content.
Things like wood screws, fasteners, electrical sockets, spring contacts, etc. are made out of 70/30 brass. The name Alpha Brass is also used for this type of C260 brass tubing. Less than 37% of the zinc in such brasses is copper that has been melted. These brasses can be drawn, brazed, welded, bent, rolled, or cold worked much more easily than other brasses because they are much ductile and softer than other brasses.
Some Important Features Of Brass 70/30 Tubes
By adjusting the proportions of zinc and copper in brass, it can be produced in both soft and hard forms. It has a shallow melting point based on the administration’s composition. Brass makes a great casting material because of this. The most common variety of alpha brass, which has copper and zinc content, is used to make brass 70/30 pipes. The 70/30 brass pipe is merely a suggestion for cold working.
Compared to brass which contains a greater proportion of zinc, this form of brass has higher corrosion resistance. Manufacturing these Brass Pipes Brass 70/30 Tubes maintaining the specific quantity and quality to provide the best manufacturing with these Brass Pipes 70/30 by using the high quality of raw material and guidelines, 70/30 Brass is used to make things like wood screws, fasteners, electrical sockets, spring contacts, etc.
Specifications Of Brass 70/30 Tubes
Specification: ASTM B135, B43, B587 / ASME B135, B43, SB587
Standard: DIN CEN/TS 13388 CW617N, ASTM B135-10, C 3771
Outer Diameter: 4mm to 150mm
Wall Thickness: 0.25mm to 8mm
Type: Seamless
Form: Round, Square, Rectangular, Hydraulic Etc
Length: 1m, 2m, 3m, 4m, 6m and as per the requirement of clients
Cut Length: Single Random, Double Random & Cut Length
This article is posted on
