You are sewing smoothly, the air is clear… when all of a sudden… there’s a rattling sound, your machine locks up and you can not continue sewing. you are trying to peek under the material and therefore the only thing you see are tangled threads. you can’t move your fabric in any direction. Now what? Why did this happen?

This article answers both of those questions. I’ll start by explaining bird nests, common problems, possible causes, and a few helpful tips about a way to fix them, and eventually, I’ll present you with a different tool to assist you get obviate bird nests. it’ll help.

What is Birds Nesting?

Birds nesting is that the accumulation of thread caught between an embroidered piece and also the needle plate, often caught between the outlet within the needle plate and therefore the hook assembly. Birds nesting prevents the free movement of products. Loops on the embroidery surface come from top tension or tension problems. Usually, either problem occurs when the polyester top thread is tensioned incorrectly. If bad enough, birds nesting and looping can reduce productivity and possibly ruin a whole embroidery project.

If the embroidery machine isn’t stopped in time, the thread bunches can pull the garment slightly through the needle hole within the throat plate and ruin it. This prevents the merchandise from free-sliding, leading to the garment detachment of the derrick hoop. Nothing eats performance over a bland item with only 1/2 the embroidery design.

Common Causes of Birds Nesting

The main source of birds nesting or looping is inaccurate bobbin insertion or running a threaded bobbin or embroidery machine without a bobbin. Running your system without a bobbin isn’t strictly bird hunting, though. Here are some common reasons why birds build nests. Also know about ricoma embroidery machine price list.

1. Your Machine is Incorrectly Threaded

Many times I can solve my bird’s nest problems by completely resetting my machine. as an example, if the thread isn’t held securely between the stress discs, you may get unsatisfactory results.

I know this could sound evident, but take a glance at your manual. How does the manufacturer specify the proper threading for your machine? you may get some insight. a number of the assumptions you will have made about threading your machine is also wrong.

2. Wrong Orientation of your Bobbin

Check to determine if your bobbin is the other way up. a method to inform if your bobbin is correctly oriented inside the bobbin case is to look at the form of the thread tail. That tail must appear as if a “p” and not a “q”.

3. Wrong Orientation of the Needle

In my embroidery machine, the flat side of the needle should face the rear of the machine. If you insert my needle the incorrect way, it can cause problems sort of a bird’s nest.

4. Dirty Threading Path

Stray threads and mud bunnies caught within the thread path at the highest of the machine can cause hanging embroidery threads and bird nests. you’ll be able to sometimes remove these bits of string and dirt by “flossing” your embroidery machine with unwaxed floss. take care to floss well inside your tension discs.

5. Dirty Bobbin Case

Remove the face plate from the bobbin and brush it with a makeup brush (or the comb that came together with your machine). Then remove the bobbin cage completely and brush that area further.

6. A Burr or a Nick on the Bobbin Case

Check the bobbin case and plate for nicks or cracks. These little divots can ruin the standard of your embroidery. Although they’ll be hard to work out, you’ll feel them. So, run your finger on the bobbin plate and pull out the bobbin case and also run your finger on its edge. If there’s a bump, gently file with a nail file to smooth the sting. If you’re unable to correct the fault, i might suggest ordering a replacement part for your machine. And also check out ricoma embroidery machine prices.

7. Thread Stuck inside the Machine

Sometimes threads can mire inside your machine which might cause problems while you’re embroidering. to seek out these sneaky buggers, you’ll have to begin the front and possibly side covers.

Look to the correct of the take-up lever. there’s a movable joint where the thread can wrap. Next, shut down the world with tweezers and an X-Active (or craft) knife. To the proper of this joint is that the tension disc. Remove any remaining thread between the discs in order that your embroidery thread runs properly through the strain area.

8. A Bent Needle

If the needle runs on a tough surface, it can easily bend causing problems with stitching later, ie a bird’s nest city! Embroidery machine needles are cheap. So, when unsure – just change your needle.

9. Thread Stuck within the Bobbin Case

Place the card under the stress spring on the bobbin. Fuzz and strings can get caught in there which may cause birds nesting.

10. Old or Poor Embroidery Thread

Thread can have a giant impact on the standard of your embroidery stitch. An old thread that has become dry and frayed, or spools that are covered in lint, will be susceptible to birds nesting. Also, really cheap yarn may be more liable to problems. see what style of embroidery thread works well on your machine, then persist with that brand when buying thread within the future.