When utilizing Canon printers, there is a chance that you’ll experience problems. But altogether, Canon is known for making the most skilled and high-quality printers. However, these printers often very successfully cover a few errors. Whether it’s a product repair or help and advice, Repair Service Center will provide you with all the required details of their Service Center nearby you.
Although there is no need for concern, the error needs to be corrected right away if you wish to use the printer without any problems.
We’ll take a close look at the remedies in this post that will help you fix the Canon printer issue 1688. But if nothing seems to be working, you should ask experts for help. Contact the Canon printer professionals straight away for a full setup.
Step-by-step instructions to fix Canon Error code 1688:
The PG-540 and CL-541 ink cartridge-compatible inkjet printers use the Canon Check Ink 1688 error as a low ink alert. The error’s official Canon content states: “The ink may have run out” (Check Ink 1688). Regardless of the mistake, you accept, your printer will halt when it recognizes that the cartridge is empty and refuse to print without your intervention.
For what reason this error occurs?
You might be surprised to see this error warning so quickly if you recently added another remanufactured cartridge or have topped off your own cartridge. This is due to the fact that these Canon printers are unable of distinguishing fresh ink or catching a glimpse inside the cartridge. Instead, the cartridge merely displays the number of pages produced as well as the usual page inclusion since it was first installed in a printer. Your printer evaluates the cartridge’s ink level based on this information, and if it determines that the cartridge is empty or lacking in ink, it will provide you the “Check Ink” 1688 message. This way of determining ink levels makes it more likely that even a special Canon ink cartridge would then not have some ink left when your printer cautions you it is unfilled.
Solution for this Problem:
You can, and it’s quite easy, to be sure. This line of Canon printers allows you to continue printing with a single catch push and will typically inform you of this in a brief but significant message once it determines that the cartridge may be empty. Simply press and hold the STOP/RESET/RESUME button on your printer for five seconds before releasing it. The image that the catch is addressed with will always remain the same, even if the name used to refer to it changes.
An upside-down triangle in a circle is seen over the image of the RESUME button. Depending on the printer model, it could appear black, pink, or even red. Holding down this button for five seconds lets your printer know that despite the low or empty cartridge gauge, you might still wish to continue printing. The ink level will continue to read low from this point on, but you can keep printing with this cartridge until the ink really runs out and the quality of the prints degrades as a result.
Any Danger to stress?
No, not at all. Any cartridge that is actually empty but is nonetheless used repeatedly risks having its print head wear out. However, if you keep an eye on the print quality the cartridge produces, you can negate the risk of predicted harm, allowing you to top off or recycle the empty cartridge as you see appropriate. In the worst-case scenario, if you don’t notice that the ink has run out and end up damaging your print head, you may effectively swap the cartridge for another one without your printer suffering any damage.
We have discussed the steps you need to take to identify Canon printer error code 1688 in this post, but if you are still having problems, get assistance from printer experts.
