Inductive proximity sensors (IPS) work by transferring energy from one object to other by creating an electromagnetic field. The field is produce by a coil located behind the sensor’s “face”, or active surface. Furthermore, when a metal target meets the sensor, the energy transfer reflects tiny circulating electrical currents known as eddy currents. Inductive proximity sensors are sometimes refer to as eddy current sensors.
The P800 Proxswitch (IPS)
The P800 Proxswitch inductive, proximity sensor detects the presence of an object at up to 12 mm or 1/2″. The sensor is designed to detect both position and speed of a rotating shaft, together an object’s presence. Moreover, the sensor can also detect the presence of a gate or other object. Contact 4B’s Tech Team to discuss your application’s specific requirements.
The LDC0851 (IPS)
The LDC0851 Inductive Proximity Sensors features a threshold adjust mode to vary the switching threshold. The threshold can adjust by subtracting the offset inductance from the reference inductance. The hysteresis window is 0.8% of the switch ON threshold. Depending on the target sensitivity and the desire switching distance, these two settings may set in a range between 20 m and 30 m.
The Pepperl+Fuchs (IPS)
The new, modern and reliable inductive proximity sensors from Pepperl+Fuchs SE have develop for a variety of applications. These sensors offer high characteristic safety values and uses with standard metal actuators. They feature a short-circuit-protected, polarity reversible and LED status indication. Pepperl+Fuchs inductive proximity sensors are ideally suite for applications that require high-precision detection of metallic objects.
The LDC0865 (IPS)
The LDC0865 inductive proximity sensor is used in a wide range of industrial applications. Its high-frequency oscillation feature helps to detect metal objects. These proximity sensors are also available in a wide range of resistances, oil and water resistance. Their low-current output means that they are suited for applications with a limited amount of current. To learn more about the LDC0865 inductive proximity sensor.
The LDC0866 (IPS)
The LDC0866 inductive proximity sensor has a sensitivity of 0.1 dB/mm, and is ideal for highspeed, precision measurements. The sensor features sub-micron resolution, a 40 kHz sampling rate, and a short, space-saving sensor body. This proximity sensor has high detection sensitivity and long detecting distances and is available with an integrated amplifier and built-in LEDs.
The LDC0870 (IPS)
Inductive proximity sensors detect metal targets without physical contact. These devices create an electromagnetic field around them, which switches on when a metal target enters the detection zone. They turn off when the target moves away. Non-metallic substances do not interfere with the sensor’s detection range. Another benefit of inductive proximity sensors is their ability to operate in wet environments and do not require physical contact with the target. These sensors have many uses and are ideal for industrial applications.
The LDC0871 (IPS)
An LDC0871 inductive proximity sensor detects a physical change in an object’s proximity to the sensor. The type of material used to create this sensor’s capacitance depends on the size of the object being detected. The resistance to water or other chemicals may affect the sensor’s performance, but these materials are suitable for many applications. There are many advantages of these sensors. Listed below are the most notable features of the LDC0871 inductive proximity sensor.
The LDC0880 (IPS)
If you are looking for a new inductive proximity sensor, the LDC0880 is an excellent choice. This sensor detects objects up to one meter away. The proximity sensor has three wires that you can use to interface with a wide variety of devices. Its output is 0V when it detects an object and 3V but it can’t see anything. You can also use this sensor with other modular building blocks, such as home and office automation building blocks. If you are looking for an inductive proximity sensor for a specific purpose, you can even integrate this sensor with other sensors to control your home and office.
The LDC0891 (IPS)
The LDC0891 Inductive Proximity Sensors is a versatile and reliable proximity sensor for industrial and commercial applications. Its dual-output configuration enables it to detect proximity and speed of a moving object. The device connected to a PLC or hazard monitoring system to provide an alarm or shutdown when certain conditions are detected. This is an excellent sensor for harsh industrial and commercial environments. Listed below are some of its main features and benefits.
The LDC0850 (IPS)
Although there are various reliable proximity sensor, however, LDC0850 inductive proximity is an excellent choice. This sensor is made to withstand the high temperatures and vibrations associated with its inductive nature. The LDC0850 can detect objects up to a radius of 70mm. The sensor features a sub-micron resolution, ultra-fast 40 kHz sampling rate, and short sensor bodies. Moreover, these sensors are compatible with 4B hazard monitoring systems and PLCs, they provide an alarm or shutdown through detection of a trip condition.
